General discussion • Re: Identifying Hardware
Why not describe the project and provide a link if it's on-line?Folk around here may be able to id things (as long as it's pi related).Statistics: Posted by MiscBits — Tue Feb 13, 2024 12:21 am
View ArticleSDK • Re: PICO : Can't update firmware uf2 by drag and drog
I just remembered from a situation at work, that Windows 11 blocks most ports out of the box, and the WiFi network security setting is public by default. So, double check inside security settings for...
View ArticleGeneral discussion • Re: Forum "503 Service Unavailable"
...Edit: Catching this spider at Cloudflare has dropped traffic by 75% so I think you should be seeing some improvement.Been fine the last day or so - thanks for the work.Statistics: Posted by...
View ArticleCamera board • Re: Camera Issues
In future, would installing a more legacy OS on the PI perhaps allow me to use Picamera rather than Picamera2? Do you know what OS it would be? I would assume bookworm would work, no?To allow picamera...
View ArticleTroubleshooting • Re: Did I make a mistake?
I write all documentation in OneNote and then I have to drop the picture of the completed work on a SharePoint folder. Once it is in the folder, I copy the link to the photo and paste it into OneNote...
View ArticleClik here to view.
Troubleshooting • Re: Raspberry Pi OS (64-bit) Release: 2023-12-05 SSH Public...
The changes you made to sshd_config are effectively no-ops, since those settings ARE the default settings on RasPiOS.I've been running Bookworm since Day 0 and have NEVER had a host identification...
View ArticleNetworking and servers • Re: Samba, iSCSI or nfs?
IIRC, but there's an 80%+ chance I'm wrong, read only access might be possible.iscsi can allow multiple clients to connect at oncebut if anything modifies the block device while others have it...
View ArticleClik here to view.
Gaming • Re: Cannot make my own warzone2100 mod help needed
Compiled WMIT from source on my Pi 400https://github.com/Warzone2100/WMITNow that's interesting.WMIT can export obj, FreeCAD can import obj and export stl.Anycubic slicer can import stl and export to...
View ArticleGeneral discussion • Re: Raspberry Pi 5 discussion thread
Exactly 19.5CThat's an excellent temperature. I wish I got the same temperature here instead of 33C..it's dependent on the room/location temp.are you running the fan at full speed.My bad, I have...
View ArticleBeginners • Re: How to install Raspbian?
Thank you for the Feedback, I hope it hasn't offended anyone, when you have used something for so long, you tend to use phrases as what you know it for, sure things get rebranded and renamed.That's...
View ArticleRaspberry Pi OS • Re: Strange files in the home directory �\u{7f}
Any idea what the cause for these strange files is?No idea what might be producing them but could it be unicodde characters in the file names and the wrong codepage/locale settings?Statistics: Posted...
View ArticleTroubleshooting • Re: Appears to be no fan curve or a very steep one
Code: ben@raspberrypi5:~ $ vcgencmd measure_temptemp=30.1'Cben@raspberrypi5:~ $ cat /sys/class/thermal/thermal_zone0/temp29800ben@raspberrypi5:~ $ cat...
View ArticleGeneral • Re: RP2040 pull-down resistance below data sheet ranges
You may not be able to measure it but resistance exists without passing current through it.No it doesn't when there is no current it is either a perfect conductor or a perfect insulator neither of...
View ArticleMedia centres • Re: Codec HAT / Software setup to replace ancient Roku...
but for the small matter of programming, yesStatistics: Posted by scruss — Wed Feb 14, 2024 1:07 am
View ArticleNetworking and servers • Re: internet on wifi, private lan on ethernet
Should work provided you use different subnets for WiFi and ethernet.Youi may have trouble with routing and name resolution if machines are visible to each other on both ethernet and WiFi. Especially...
View ArticleOther RP2040 boards • Re: Generic E-Ink Display with Pico/RP2040
There isn't really such a thing as a generic e-ink module. All of them use some kind of driver chip.From what I can tell, the Inland module (Micro Center's house brand?) is a clone of WaveShare's one...
View ArticleBeginners • Re: Flash Led - C code Linking error
WiringPi is no longer active and the site closed at the end of last year http://wiringpi.com/index.htmlHave a look at using https://abyz.me.uk/rpi/pigpio/Statistics: Posted by MiscBits — Wed Feb 21,...
View ArticleGaming • Re: Anyone compile Dolphin for Pi 5 ?
Thanks I eventually got it working.Statistics: Posted by Rygar — Wed Feb 21, 2024 12:32 am
View ArticleClik here to view.
Troubleshooting • Re: FullPageOS (Nightly) - HELP!
Thank you! Here is the link:https://github.com/guysoft/FullPageOS/issues/520If anyone else might know what could be the problem please weigh in Statistics: Posted by guruabyss — Wed Feb 21, 2024 12:32...
View ArticleBeginners • Re: How to setup static IP address on Raspberry Pi OS 64bit bookworm
The NM creators strongly recommend you do not create the files directly but use the package tools (i.e. they reserve the right to change the file use / layout / names etc).How do they expect you to do...
View Article