I suspect the router is blocking the traffic.
A good way of testing the Wireguard installation is to put the laptop on the same network as the Pi, and change the endpoint address to 192.168.1.35:51820.
When activated, you should then see both the Tx and the Rx counts tick up, and you can ping 192.168.0.1 from the laptop. If the kill-switch is set, that'll be the only device you can ping; if un-set, the laptop should retain all the normal network connectivity as well.
A good way of testing the Wireguard installation is to put the laptop on the same network as the Pi, and change the endpoint address to 192.168.1.35:51820.
When activated, you should then see both the Tx and the Rx counts tick up, and you can ping 192.168.0.1 from the laptop. If the kill-switch is set, that'll be the only device you can ping; if un-set, the laptop should retain all the normal network connectivity as well.
Statistics: Posted by jayben — Tue Apr 09, 2024 11:04 am