Interfacing (DSI, CSI, I2C, etc.) • Re: Sometimes the DSI display screen can't auto start the desktop

Code:

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083][    0.000000] Linux version 6.1.21-v8+ (dom@buildbot) (aarch64-linux-gnu-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1642 SMP PREEMPT Mon Apr  3 17:24:16 BST 2023[    0.000000] random: crng init done[    0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.2[    0.000000] efi: UEFI not found.[    0.000000] Reserved memory: created CMA memory pool at 0x000000000ec00000, size 512 MiB[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool[    0.000000] Zone ranges:[    0.000000]   DMA      [mem 0x0000000000000000-0x000000003fffffff][    0.000000]   DMA32    [mem 0x0000000040000000-0x00000000fbffffff][    0.000000]   Normal   empty[    0.000000] Movable zone start for each node[    0.000000] Early memory node ranges[    0.000000]   node   0: [mem 0x0000000000000000-0x000000003b3fffff][    0.000000]   node   0: [mem 0x0000000040000000-0x00000000fbffffff][    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff][    0.000000] On node 0, zone DMA32: 19456 pages in unavailable ranges[    0.000000] On node 0, zone DMA32: 16384 pages in unavailable ranges[    0.000000] percpu: Embedded 29 pages/cpu s78504 r8192 d32088 u118784[    0.000000] pcpu-alloc: s78504 r8192 d32088 u118784 alloc=29*4096[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [    0.000000] Detected PIPT I-cache on CPU0[    0.000000] CPU features: detected: Spectre-v2[    0.000000] CPU features: detected: Spectre-v3a[    0.000000] CPU features: detected: Spectre-v4[    0.000000] CPU features: detected: Spectre-BHB[    0.000000] CPU features: kernel page table isolation forced ON by KASLR[    0.000000] CPU features: detected: Kernel page table isolation (KPTI)[    0.000000] CPU features: detected: ARM erratum 1742098[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923[    0.000000] alternatives: applying boot alternatives[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 996912[    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=DC:A6:32:57:31:1C vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=29808b8d-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles[    0.000000] Unknown kernel command line parameters "splash", will be passed to user space.[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off[    0.000000] software IO TLB: area num 4.[    0.000000] software IO TLB: mapped [mem 0x0000000037400000-0x000000003b400000] (64MB)[    0.000000] Memory: 3356940K/4050944K available (11776K kernel code, 2106K rwdata, 3688K rodata, 4160K init, 1077K bss, 169716K reserved, 524288K cma-reserved)[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1[    0.000000] ftrace: allocating 39744 entries in 156 pages[    0.000000] ftrace: allocated 156 pages with 4 groups[    0.000000] trace event string verifier disabled[    0.000000] rcu: Preemptible hierarchical RCU implementation.[    0.000000] rcu: RCU event tracing is enabled.[    0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.[    0.000000] Trampoline variant of Tasks RCU enabled.[    0.000000] Rude variant of Tasks RCU enabled.[    0.000000] Tracing variant of Tasks RCU enabled.[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0[    0.000000] Root IRQ handler: gic_handle_irq[    0.000000] GIC: Using split EOI/Deactivate mode[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.[    0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns[    0.000001] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns[    0.000314] Console: colour dummy device 80x25[    0.000378] printk: console [tty1] enabled[    0.000437] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)[    0.000461] pid_max: default: 32768 minimum: 301[    0.000594] LSM: Security Framework initializing[    0.000810] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)[    0.000877] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)[    0.002158] cgroup: Disabling memory control group subsystem[    0.004406] cblist_init_generic: Setting adjustable number of callback queues.[    0.004426] cblist_init_generic: Setting shift to 2 and lim to 1.[    0.004607] cblist_init_generic: Setting shift to 2 and lim to 1.[    0.004784] cblist_init_generic: Setting shift to 2 and lim to 1.[    0.005230] rcu: Hierarchical SRCU implementation.[    0.005242] rcu: Max phase no-delay instances is 1000.[    0.006569] EFI services will not be available.[    0.007097] smp: Bringing up secondary CPUs ...[    0.008241] Detected PIPT I-cache on CPU1[    0.008403] CPU1: Booted secondary processor 0x0000000001 [0x410fd083][    0.009553] Detected PIPT I-cache on CPU2[    0.009677] CPU2: Booted secondary processor 0x0000000002 [0x410fd083][    0.010795] Detected PIPT I-cache on CPU3[    0.010923] CPU3: Booted secondary processor 0x0000000003 [0x410fd083][    0.011069] smp: Brought up 1 node, 4 CPUs[    0.011092] SMP: Total of 4 processors activated.[    0.011104] CPU features: detected: 32-bit EL0 Support[    0.011114] CPU features: detected: 32-bit EL1 Support[    0.011127] CPU features: detected: CRC32 instructions[    0.011261] CPU: All CPU(s) started at EL2[    0.011286] alternatives: applying system-wide alternatives[    0.013184] devtmpfs: initialized[    0.025578] Enabled cp15_barrier support[    0.025621] Enabled setend support[    0.025839] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns[    0.025876] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)[    0.039128] pinctrl core: initialized pinctrl subsystem[    0.040009] DMI not present or invalid.[    0.040752] NET: Registered PF_NETLINK/PF_ROUTE protocol family[    0.044289] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations[    0.044600] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations[    0.045537] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations[    0.045634] audit: initializing netlink subsys (disabled)[    0.045900] audit: type=2000 audit(0.044:1): state=initialized audit_enabled=0 res=1[    0.046499] thermal_sys: Registered thermal governor 'step_wise'[    0.046588] cpuidle: using governor menu[    0.047003] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.[    0.047201] ASID allocator initialised with 32768 entries[    0.047374] Serial: AMBA PL011 UART driver[    0.062157] platform fe101000.cprman: Fixed dependency cycle(s) with /soc/dsi@7e700000[    0.063281] bcm2835-mbox fe00b880.mailbox: mailbox enabled[    0.084646] raspberrypi-firmware soc:firmware: Attached to firmware from 2023-03-17T10:50:39, variant start[    0.088660] raspberrypi-firmware soc:firmware: Firmware hash is 82f3750a65fadae9a38077e3c2e217ad158c8d54[    0.104724] KASLR enabled[    0.141812] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1[    0.147648] SCSI subsystem initialized[    0.147911] usbcore: registered new interface driver usbfs[    0.147970] usbcore: registered new interface driver hub[    0.148037] usbcore: registered new device driver usb[    0.148449] usb_phy_generic phy: supply vcc not found, using dummy regulator[    0.148663] usb_phy_generic phy: dummy supplies not allowed for exclusive requests[    0.149014] pps_core: LinuxPPS API ver. 1 registered[    0.149027] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>[    0.149053] PTP clock support registered[    0.150196] vgaarb: loaded[    0.150978] clocksource: Switched to clocksource arch_sys_counter[    0.151743] VFS: Disk quotas dquot_6.6.0[    0.151826] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)[    0.152008] FS-Cache: Loaded[    0.152213] CacheFiles: Loaded[    0.163093] NET: Registered PF_INET protocol family[    0.163663] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)[    0.168364] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)[    0.168428] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)[    0.168456] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)[    0.168772] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)[    0.169728] TCP: Hash tables configured (established 32768 bind 32768)[    0.169981] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)[    0.170068] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)[    0.170393] NET: Registered PF_UNIX/PF_LOCAL protocol family[    0.171261] RPC: Registered named UNIX socket transport module.[    0.171280] RPC: Registered udp transport module.[    0.171291] RPC: Registered tcp transport module.[    0.171302] RPC: Registered tcp NFSv4.1 backchannel transport module.[    0.171327] PCI: CLS 0 bytes, default 64[    0.174294] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available[    0.174681] kvm [1]: IPA Size Limit: 44 bits[    0.176066] kvm [1]: vgic interrupt IRQ9[    0.176290] kvm [1]: Hyp mode initialized successfully[    1.311140] Initialise system trusted keyrings[    1.311629] workingset: timestamp_bits=46 max_order=20 bucket_order=0[    1.319249] zbud: loaded[    1.322109] NFS: Registering the id_resolver key type[    1.322153] Key type id_resolver registered[    1.322165] Key type id_legacy registered[    1.322288] nfs4filelayout_init: NFSv4 File Layout Driver Registering...[    1.322305] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...[    1.323811] Key type asymmetric registered[    1.323830] Asymmetric key parser 'x509' registered[    1.323910] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)[    1.324186] io scheduler mq-deadline registered[    1.324203] io scheduler kyber registered[    1.326076] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 27)[    1.335118] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:[    1.335166] brcm-pcie fd500000.pcie:   No bus range found for /scb/pcie@7d500000, using [bus 00-ff][    1.335255] brcm-pcie fd500000.pcie:      MEM 0x0600000000..0x063fffffff -> 0x00c0000000[    1.335340] brcm-pcie fd500000.pcie:   IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000[    1.336384] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00[    1.336404] pci_bus 0000:00: root bus resource [bus 00-ff][    1.336422] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])[    1.336505] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400[    1.336763] pci 0000:00:00.0: PME# supported from D0 D3hot[    1.340954] pci_bus 0000:01: supply vpcie3v3 not found, using dummy regulator[    1.341146] pci_bus 0000:01: supply vpcie3v3aux not found, using dummy regulator[    1.341246] pci_bus 0000:01: supply vpcie12v not found, using dummy regulator[    1.393072] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)[    1.393236] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330[    1.393362] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit][    1.393844] pci 0000:01:00.0: PME# supported from D0 D3cold[    1.394615] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff][    1.394641] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit][    1.394684] pci 0000:00:00.0: PCI bridge to [bus 01][    1.394706] pci 0000:00:00.0:   bridge window [mem 0x600000000-0x6000fffff][    1.395925] simple-framebuffer 3ea50000.framebuffer: framebuffer at 0x3ea50000, 0x177000 bytes[    1.395946] simple-framebuffer 3ea50000.framebuffer: format=a8r8g8b8, mode=800x480x32, linelength=3200[    1.396472] Console: switching to colour frame buffer device 100x30[    1.398051] simple-framebuffer 3ea50000.framebuffer: fb0: simplefb registered![    1.411366] iproc-rng200 fe104000.rng: hwrng registered[    1.411950] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)[    1.413517] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000[    1.426265] brd: module loaded[    1.434843] loop: module loaded[    1.435734] Loading iSCSI transport class v2.0-870.[    1.441174] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000[    1.499141] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus[    1.500325] usbcore: registered new interface driver r8152[    1.500401] usbcore: registered new interface driver lan78xx[    1.500476] usbcore: registered new interface driver smsc95xx[    1.502075] pci 0000:00:00.0: enabling device (0000 -> 0002)[    1.502117] xhci_hcd 0000:01:00.0: enabling device (0000 -> 0002)[    1.502216] xhci_hcd 0000:01:00.0: xHCI Host Controller[    1.502258] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1[    1.503007] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000e40000000890[    1.503685] xhci_hcd 0000:01:00.0: xHCI Host Controller[    1.503722] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2[    1.503744] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed[    1.504092] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01[    1.504112] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1[    1.504127] usb usb1: Product: xHCI Host Controller[    1.504140] usb usb1: Manufacturer: Linux 6.1.21-v8+ xhci-hcd[    1.504153] usb usb1: SerialNumber: 0000:01:00.0[    1.504898] hub 1-0:1.0: USB hub found[    1.504975] hub 1-0:1.0: 1 port detected[    1.505983] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01[    1.506004] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1[    1.506019] usb usb2: Product: xHCI Host Controller[    1.506031] usb usb2: Manufacturer: Linux 6.1.21-v8+ xhci-hcd[    1.506044] usb usb2: SerialNumber: 0000:01:00.0[    1.506708] hub 2-0:1.0: USB hub found[    1.506786] hub 2-0:1.0: 4 ports detected[    1.508638] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)[    1.509010] dwc_otg: FIQ enabled[    1.509021] dwc_otg: NAK holdoff enabled[    1.509031] dwc_otg: FIQ split-transaction FSM enabled[    1.509047] Module dwc_common_port init[    1.509604] usbcore: registered new interface driver uas[    1.509715] usbcore: registered new interface driver usb-storage[    1.509922] mousedev: PS/2 mouse device common for all mice[    1.516158] sdhci: Secure Digital Host Controller Interface driver[    1.516178] sdhci: Copyright(c) Pierre Ossman[    1.516912] sdhci-pltfm: SDHCI platform and OF driver helper[    1.520597] ledtrig-cpu: registered to indicate activity on CPUs[    1.520965] hid: raw HID events driver (C) Jiri Kosina[    1.521182] usbcore: registered new interface driver usbhid[    1.521196] usbhid: USB HID core driver[    1.530101] NET: Registered PF_PACKET protocol family[    1.530237] Key type dns_resolver registered[    1.531682] registered taskstats version 1[    1.531763] Loading compiled-in X.509 certificates[    1.532664] Key type .fscrypt registered[    1.532679] Key type fscrypt-provisioning registered[    1.548692] uart-pl011 fe201000.serial: there is not valid maps for state default[    1.549429] uart-pl011 fe201000.serial: cts_event_workaround enabled[    1.549586] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 36, base_baud = 0) is a PL011 rev2[    1.558792] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer[    1.559303] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver[    1.560611] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0[    1.560630] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated[    1.591900] of_cfs_init[    1.592040] of_cfs_init: OK[    1.626181] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA[    1.626613] Waiting for root device PARTUUID=29808b8d-02...[    1.675251] mmc1: new high speed SDIO card at address 0001[    1.727089] mmc0: new ultra high speed DDR50 SDHC card at address 59b4[    1.728116] mmcblk0: mmc0:59b4 USD00 15.0 GiB [    1.731303]  mmcblk0: p1 p2[    1.731866] mmcblk0: mmc0:59b4 USD00 15.0 GiB[    1.757018] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem[    1.757043] EXT4-fs (mmcblk0p2): write access will be enabled during recovery[    1.759039] usb 1-1: new high-speed USB device number 2 using xhci_hcd[    1.909649] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21[    1.909685] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0[    1.909701] usb 1-1: Product: USB2.0 Hub[    1.911625] hub 1-1:1.0: USB hub found[    1.911892] hub 1-1:1.0: 4 ports detected[    2.149949] EXT4-fs (mmcblk0p2): recovery complete[    2.159031] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.[    2.159142] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.[    2.161445] devtmpfs: mounted[    2.169916] Freeing unused kernel memory: 4160K[    2.170119] Run /sbin/init as init process[    2.170131]   with arguments:[    2.170140]     /sbin/init[    2.170149]     splash[    2.170159]   with environment:[    2.170167]     HOME=/[    2.170177]     TERM=linux[    2.555311] systemd[1]: System time before build time, advancing clock.[    2.739917] NET: Registered PF_INET6 protocol family[    2.741832] Segment Routing with IPv6[    2.741875] In-situ OAM (IOAM) with IPv6[    2.832589] systemd[1]: systemd 247.3-7+deb11u2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)[    2.833610] systemd[1]: Detected architecture arm64.[    2.835919] systemd[1]: Set hostname to <raspberrypi>.[    3.420136] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.[    3.560922] systemd[1]: Queued start job for default target Graphical Interface.[    3.580660] systemd[1]: Created slice system-getty.slice.[    3.581953] systemd[1]: Created slice system-modprobe.slice.[    3.582940] systemd[1]: Created slice system-systemd\x2dfsck.slice.[    3.583907] systemd[1]: Created slice User and Session Slice.[    3.584430] systemd[1]: Started Forward Password Requests to Wall Directory Watch.[    3.585461] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.[    3.585875] systemd[1]: Reached target Slices.[    3.586019] systemd[1]: Reached target Swap.[    3.587063] systemd[1]: Listening on Syslog Socket.[    3.587776] systemd[1]: Listening on fsck to fsckd communication Socket.[    3.588170] systemd[1]: Listening on initctl Compatibility Named Pipe.[    3.589386] systemd[1]: Listening on Journal Audit Socket.[    3.590174] systemd[1]: Listening on Journal Socket (/dev/log).[    3.591305] systemd[1]: Listening on Journal Socket.[    3.597505] systemd[1]: Listening on udev Control Socket.[    3.598378] systemd[1]: Listening on udev Kernel Socket.[    3.599513] systemd[1]: Condition check resulted in Huge Pages File System being skipped.[    3.619488] systemd[1]: Mounting POSIX Message Queue File System...[    3.624390] systemd[1]: Mounting RPC Pipe File System...[    3.629933] systemd[1]: Mounting Kernel Debug File System...[    3.635464] systemd[1]: Mounting Kernel Trace File System...[    3.635995] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.[    3.642556] systemd[1]: Starting Restore / save the current clock...[    3.648746] systemd[1]: Starting Set the console keyboard layout...[    3.654196] systemd[1]: Starting Create list of static device nodes for the current kernel...[    3.659993] systemd[1]: Starting Load Kernel Module configfs...[    3.665753] systemd[1]: Starting Load Kernel Module drm...[    3.671917] systemd[1]: Starting Load Kernel Module fuse...[    3.677509] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.[    3.682915] systemd[1]: Starting File System Check on Root Device...[    3.693022] systemd[1]: Starting Journal Service...[    3.703824] systemd[1]: Starting Load Kernel Modules...[    3.711821] systemd[1]: Starting Coldplug All udev Devices...[    3.745153] systemd[1]: Mounted POSIX Message Queue File System.[    3.746075] systemd[1]: Mounted RPC Pipe File System.[    3.746929] systemd[1]: Mounted Kernel Debug File System.[    3.756295] systemd[1]: Mounted Kernel Trace File System.[    3.758605] systemd[1]: Finished Create list of static device nodes for the current kernel.[    3.779156] fuse: init (API version 7.37)[    3.783236] systemd[1]: modprobe@configfs.service: Succeeded.[    3.784805] systemd[1]: Finished Load Kernel Module configfs.[    3.789468] systemd[1]: Finished Restore / save the current clock.[    3.792441] systemd[1]: modprobe@fuse.service: Succeeded.[    3.794002] systemd[1]: Finished Load Kernel Module fuse.[    3.808544] i2c_dev: i2c /dev entries driver[    3.827656] systemd[1]: Mounting FUSE Control File System...[    3.837229] systemd[1]: Mounting Kernel Configuration File System...[    3.846393] systemd[1]: Started File System Check Daemon to report status.[    3.851214] systemd[1]: Finished Load Kernel Modules.[    3.861736] systemd[1]: Starting Apply Kernel Variables...[    3.873463] systemd[1]: Mounted Kernel Configuration File System.[    3.901770] systemd[1]: Mounted FUSE Control File System.[    3.921580] systemd[1]: modprobe@drm.service: Succeeded.[    3.923349] systemd[1]: Finished Load Kernel Module drm.[    3.951276] systemd[1]: Finished Apply Kernel Variables.[    3.953765] systemd[1]: Finished File System Check on Root Device.[    3.984502] systemd[1]: Starting Remount Root and Kernel File Systems...[    4.039064] systemd[1]: Started Journal Service.[    4.134345] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.[    4.231613] systemd-journald[144]: Received client request to flush runtime journal.[    4.308437] systemd-journald[144]: File /var/log/journal/88d06db7e5ce49bea0e2dcab4ea279fb/system.journal corrupted or uncleanly shut down, renaming and replacing.[    6.435376] mc: Linux media interface: v0.10[    6.514172] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.[    6.532611] bcm2835_vc_sm_cma_probe: Videocore shared memory driver[    6.532658] [vc_sm_connected_init]: start[    6.551477] brcmstb-i2c fef04500.i2c:  @97500hz registered in polling mode[    6.555941] [vc_sm_connected_init]: installed successfully[    6.585317] brcmstb-i2c fef09500.i2c:  @97500hz registered in polling mode[    6.635014] videodev: Linux video capture interface: v2.00[    6.746040] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.[    6.854220] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.[    6.858211] bcm2835_audio bcm2835_audio: card created with 8 channels[    6.869337] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned.[    6.875150] cfg80211: Loading compiled-in X.509 certificates for regulatory database[    6.900085] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'[    6.901321] i2c i2c-22: Added multiplexed i2c bus 0[    6.912251] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid[    6.916197] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.[    6.922884] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.[    6.938538] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.[    6.949613] rpivid feb10000.codec: Device registered as /dev/video19[    6.955664] i2c i2c-22: Added multiplexed i2c bus 10[    6.962867] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13[    6.963696] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14[    6.976444] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15[    6.984926] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16[    6.984978] bcm2835-isp bcm2835-isp: Register output node 0 with media controller[    6.985001] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller[    6.985020] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller[    6.985048] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller[    6.996118] bcm2835-codec bcm2835-codec: Device registered as /dev/video10[    6.996203] bcm2835-codec bcm2835-codec: Loaded V4L2 decode[    7.005314] bcm2835-codec bcm2835-codec: Device registered as /dev/video11[    7.005377] bcm2835-codec bcm2835-codec: Loaded V4L2 encode[    7.031560] bcm2835-codec bcm2835-codec: Device registered as /dev/video12[    7.031634] bcm2835-codec bcm2835-codec: Loaded V4L2 isp[    7.047184] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20[    7.047204] bcm2835-codec bcm2835-codec: Device registered as /dev/video18[    7.047251] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx[    7.052557] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21[    7.055944] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22[    7.105305] bcm2835-codec bcm2835-codec: Device registered as /dev/video31[    7.105396] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image[    7.140262] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23[    7.140319] bcm2835-isp bcm2835-isp: Register output node 0 with media controller[    7.140352] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller[    7.140387] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller[    7.140405] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller[    7.194933] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp[    7.250542] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0[    7.257301] brcmfmac: F1 signature read @0x18000000=0x15264345[    7.266985] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6[    7.304750] usbcore: registered new interface driver brcmfmac[    7.540389] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Nov  1 2021 00:37:25 version 7.45.241 (1a2f2fa CY) FWID 01-703fd60[    8.561106] vc4_dsi fe700000.dsi: Failed to create device link (0x180) with 1.panel_disp1[    8.563359] vc4_dsi fe700000.dsi: Failed to create device link (0x180) with 2.reg_bridge[    8.569388] Console: switching to colour dummy device 80x25[    8.642122] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])[    8.649982] Registered IR keymap rc-cec[    8.650222] rc rc0: vc4-hdmi-0 as /devices/platform/soc/fef00700.hdmi/rc/rc0[    8.650460] input: vc4-hdmi-0 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input0[    8.660938] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4])[    8.673320] Registered IR keymap rc-cec[    8.673544] rc rc1: vc4-hdmi-1 as /devices/platform/soc/fef05700.hdmi/rc/rc1[    8.673776] input: vc4-hdmi-1 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input1[    8.681785] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4])[    8.683453] vc4-drm gpu: bound fe700000.dsi (ops vc4_dsi_ops [vc4])[    8.691082] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4])[    8.697838] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4])[    8.703917] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4])[    8.708640] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4])[    8.709077] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4])[    8.715198] vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops [vc4])[    8.735863] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1[    8.813980] Console: switching to colour frame buffer device 100x30[    8.814068] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device[    8.847867] edt_ft5x06 10-0038: supply iovcc not found, using dummy regulator[    9.195200] uart-pl011 fe201000.serial: no DMA platform data[    9.298245] input: generic ft5x06 (00) as /devices/platform/soc/fe205000.i2c/i2c-22/i2c-10/10-0038/input/input2[    9.343591] 8021q: 802.1Q VLAN Support v1.8[    9.545656] Adding 102396k swap on /var/swap.  Priority:-2 extents:1 across:102396k SSFS[   10.043369] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled[   11.257433] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)[   11.258937] bcmgenet fd580000.ethernet eth0: Link is Down[   11.454988] vc4_dsi fe700000.dsi: transfer interrupt wait timeout[   11.455002] vc4_dsi fe700000.dsi: instat: 0x00000000[   11.455011] [drm:vc4_dsi_host_transfer [vc4]] *ERROR* DSI transfer failed, resetting: -110[   11.671018] tc358762 fe700000.dsi.0: error initializing bridge (-110)[   15.445932] systemd-journald[144]: File /var/log/journal/88d06db7e5ce49bea0e2dcab4ea279fb/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.[   19.752779] Bluetooth: Core ver 2.22[   19.752885] NET: Registered PF_BLUETOOTH protocol family[   19.752891] Bluetooth: HCI device and connection manager initialized[   19.752908] Bluetooth: HCI socket layer initialized[   19.752917] Bluetooth: L2CAP socket layer initialized[   19.752933] Bluetooth: SCO socket layer initialized[   19.768225] Bluetooth: HCI UART driver ver 2.3[   19.768249] Bluetooth: HCI UART protocol H4 registered[   19.768325] Bluetooth: HCI UART protocol Three-wire (H5) registered[   19.768533] Bluetooth: HCI UART protocol Broadcom registered[   20.116051] Bluetooth: BNEP (Ethernet Emulation) ver 1.3[   20.116076] Bluetooth: BNEP filters: protocol multicast[   20.116093] Bluetooth: BNEP socket layer initialized[   20.124298] Bluetooth: MGMT ver 1.22[   20.145592] NET: Registered PF_ALG protocol family[   20.392344] Bluetooth: RFCOMM TTY layer initialized[   20.392375] Bluetooth: RFCOMM socket layer initialized[   20.392400] Bluetooth: RFCOMM ver 1.11[   21.303671] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

Code:

X.Org X Server 1.20.11X Protocol Version 11, Revision 0[    11.827] Build Operating System: linux Debian[    11.827] Current Operating System: Linux raspberrypi 6.1.21-v8+ #1642 SMP PREEMPT Mon Apr  3 17:24:16 BST 2023 aarch64[    11.827] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=DC:A6:32:57:31:1C vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=29808b8d-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles[    11.827] Build Date: 30 March 2023  01:46:14PM[    11.827] xorg-server 2:1.20.11-1+rpt3+deb11u6 (https://www.debian.org/support) [    11.828] Current version of pixman: 0.40.0[    11.828] Before reporting problems, check http://wiki.x.orgto make sure that you have the latest version.[    11.828] Markers: (--) probed, (**) from config file, (==) default setting,(++) from command line, (!!) notice, (II) informational,(WW) warning, (EE) error, (NI) not implemented, (??) unknown.[    11.828] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 22 05:36:43 2024[    11.830] (==) Using system config directory "/usr/share/X11/xorg.conf.d"[    11.834] (==) No Layout section.  Using the first Screen section.[    11.834] (==) No screen section available. Using defaults.[    11.834] (**) |-->Screen "Default Screen Section" (0)[    11.834] (**) |   |-->Monitor "<default monitor>"[    11.835] (==) No monitor specified for screen "Default Screen Section".Using a default monitor configuration.[    11.835] (**) Option "Debug" "dmabuf_capable"[    11.835] (==) Automatically adding devices[    11.835] (==) Automatically enabling devices[    11.835] (==) Automatically adding GPU devices[    11.835] (==) Max clients allowed: 256, resource mask: 0x1fffff[    11.835] (WW) The directory "/usr/share/fonts/X11/misc" does not exist.[    11.835] Entry deleted from font path.[    11.835] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.[    11.835] Entry deleted from font path.[    11.835] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.[    11.835] Entry deleted from font path.[    11.835] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.[    11.835] Entry deleted from font path.[    11.835] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.[    11.835] Entry deleted from font path.[    11.835] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.[    11.835] Entry deleted from font path.[    11.835] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.[    11.836] Entry deleted from font path.[    11.836] (==) FontPath set to:built-ins[    11.836] (==) ModulePath set to "/usr/lib/xorg/modules"[    11.836] (II) The server relies on udev to provide the list of input devices.If no devices become available, reconfigure udev or disable AutoAddDevices.[    11.836] (II) Loader magic: 0x557b31de28[    11.836] (II) Module ABI versions:[    11.836] X.Org ANSI C Emulation: 0.4[    11.836] X.Org Video Driver: 24.1[    11.836] X.Org XInput driver : 24.1[    11.836] X.Org Server Extension : 10.0[    11.838] (++) using VT number 7[    11.838] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration[    11.843] (II) xfree86: Adding drm device (/dev/dri/card1)[    11.852] (II) xfree86: Adding drm device (/dev/dri/card0)[    11.854] (II) no primary bus or device found[    11.854] falling back to /sys/devices/platform/gpu/drm/card1[    11.854] (II) LoadModule: "glx"[    11.856] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so[    11.903] (II) Module glx: vendor="X.Org Foundation"[    11.903] compiled for 1.20.11, module version = 1.0.0[    11.903] ABI class: X.Org Server Extension, version 10.0[    11.903] (==) Matched modesetting as autoconfigured driver 0[    11.903] (==) Matched fbdev as autoconfigured driver 1[    11.903] (==) Assigned the driver to the xf86ConfigLayout[    11.903] (II) LoadModule: "modesetting"[    11.905] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so[    11.917] (II) Module modesetting: vendor="X.Org Foundation"[    11.917] compiled for 1.20.11, module version = 1.20.11[    11.917] Module class: X.Org Video Driver[    11.917] ABI class: X.Org Video Driver, version 24.1[    11.917] (II) LoadModule: "fbdev"[    11.917] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so[    11.919] (II) Module fbdev: vendor="X.Org Foundation"[    11.919] compiled for 1.20.0, module version = 0.5.0[    11.919] Module class: X.Org Video Driver[    11.919] ABI class: X.Org Video Driver, version 24.0[    11.919] (II) modesetting: Driver for Modesetting Kernel Drivers: kms[    11.919] (II) FBDEV: driver for framebuffer: fbdev[    11.950] (II) modeset(0): using drv /dev/dri/card1[    11.950] (WW) Falling back to old probe method for fbdev[    11.951] (II) Loading sub module "fbdevhw"[    11.951] (II) LoadModule: "fbdevhw"[    11.952] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so[    11.954] (II) Module fbdevhw: vendor="X.Org Foundation"[    11.954] compiled for 1.20.11, module version = 0.0.2[    11.954] ABI class: X.Org Video Driver, version 24.1[    11.955] (II) modeset(0): Creating default Display subsection in Screen section"Default Screen Section" for depth/fbbpp 24/32[    11.955] (==) modeset(0): Depth 24, (==) framebuffer bpp 32[    11.955] (==) modeset(0): RGB weight 888[    11.955] (==) modeset(0): Default visual is TrueColor[    11.955] (II) Loading sub module "glamoregl"[    11.955] (II) LoadModule: "glamoregl"[    11.955] (II) Loading /usr/lib/xorg/modules/libglamoregl.so[    11.993] (II) Module glamoregl: vendor="X.Org Foundation"[    11.993] compiled for 1.20.11, module version = 1.0.1[    11.993] ABI class: X.Org ANSI C Emulation, version 0.4[    13.619] (II) modeset(0): glamor X acceleration enabled on V3D 4.2[    13.619] (II) modeset(0): glamor initialized[    13.620] (II) modeset(0): Output HDMI-1 has no monitor section[    13.672] (II) modeset(0): Output HDMI-2 has no monitor section[    13.672] (II) modeset(0): Output DSI-1 has no monitor section[    13.690] (II) modeset(0): EDID for output HDMI-1[    13.741] (II) modeset(0): EDID for output HDMI-2[    13.741] (II) modeset(0): Manufacturer: XMI  Model: c001  Serial#: 1[    13.741] (II) modeset(0): Year: 2021  Week: 41[    13.741] (II) modeset(0): EDID Version: 1.3[    13.741] (II) modeset(0): Digital Display Input[    13.741] (II) modeset(0): Max Image Size [cm]: horiz.: 60  vert.: 33[    13.742] (II) modeset(0): Gamma: 2.20[    13.742] (II) modeset(0): DPMS capabilities: Off[    13.742] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [    13.742] (II) modeset(0): First detailed timing is preferred mode[    13.742] (II) modeset(0): redX: 0.641 redY: 0.333   greenX: 0.315 greenY: 0.624[    13.742] (II) modeset(0): blueX: 0.149 blueY: 0.049   whiteX: 0.313 whiteY: 0.329[    13.742] (II) modeset(0): Supported established timings:[    13.742] (II) modeset(0): 720x400@70Hz[    13.742] (II) modeset(0): 640x480@60Hz[    13.742] (II) modeset(0): 640x480@67Hz[    13.742] (II) modeset(0): 640x480@72Hz[    13.742] (II) modeset(0): 640x480@75Hz[    13.742] (II) modeset(0): 800x600@60Hz[    13.742] (II) modeset(0): 800x600@72Hz[    13.742] (II) modeset(0): 800x600@75Hz[    13.742] (II) modeset(0): 1024x768@60Hz[    13.742] (II) modeset(0): 1024x768@70Hz[    13.742] (II) modeset(0): 1024x768@75Hz[    13.742] (II) modeset(0): 1280x1024@75Hz[    13.742] (II) modeset(0): Manufacturer's mask: 0[    13.742] (II) modeset(0): Supported standard timings:[    13.742] (II) modeset(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337[    13.742] (II) modeset(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897[    13.742] (II) modeset(0): #2: hsize: 1280  vsize 1024  refresh: 72  vid: 35969[    13.742] (II) modeset(0): #3: hsize: 1280  vsize 800  refresh: 60  vid: 129[    13.742] (II) modeset(0): #4: hsize: 1440  vsize 900  refresh: 60  vid: 149[    13.742] (II) modeset(0): #5: hsize: 1440  vsize 900  refresh: 75  vid: 3989[    13.742] (II) modeset(0): #6: hsize: 1600  vsize 900  refresh: 60  vid: 49321[    13.742] (II) modeset(0): #7: hsize: 1680  vsize 1050  refresh: 60  vid: 179[    13.742] (II) modeset(0): Supported detailed timing:[    13.742] (II) modeset(0): clock: 148.5 MHz   Image Size:  597 x 336 mm[    13.742] (II) modeset(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0[    13.742] (II) modeset(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0[    13.742] (II) modeset(0): Ranges: V min: 50 V max: 75 Hz, H min: 15 H max: 100 kHz, PixClock max 195 MHz[    13.742] (II) modeset(0): Serial No: 30878Z0024704[    13.742] (II) modeset(0): Monitor name: Redmi 27 NF[    13.742] (II) modeset(0): Supported detailed timing:[    13.742] (II) modeset(0): clock: 74.2 MHz   Image Size:  160 x 90 mm[    13.742] (II) modeset(0): h_active: 1280  h_sync: 1390  h_sync_end 1430 h_blank_end 1650 h_border: 0[    13.743] (II) modeset(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0[    13.743] (II) modeset(0): Supported detailed timing:[    13.743] (II) modeset(0): clock: 85.5 MHz   Image Size:  526 x 339 mm[    13.743] (II) modeset(0): h_active: 1366  h_sync: 1436  h_sync_end 1579 h_blank_end 1792 h_border: 0[    13.743] (II) modeset(0): v_active: 768  v_sync: 771  v_sync_end 774 v_blanking: 798 v_border: 0[    13.743] (II) modeset(0): Supported detailed timing:[    13.743] (II) modeset(0): clock: 185.6 MHz   Image Size:  160 x 90 mm[    13.743] (II) modeset(0): h_active: 1920  h_sync: 1968  h_sync_end 2008 h_blank_end 2200 h_border: 0[    13.743] (II) modeset(0): v_active: 1080  v_sync: 1085  v_sync_end 1090 v_blanking: 1125 v_border: 0[    13.743] (II) modeset(0): Supported detailed timing:[    13.743] (II) modeset(0): clock: 79.5 MHz   Image Size:  368 x 207 mm[    13.743] (II) modeset(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1664 h_border: 0[    13.743] (II) modeset(0): v_active: 768  v_sync: 771  v_sync_end 778 v_blanking: 798 v_border: 0[    13.743] (II) modeset(0): Number of EDID sections to follow: 1[    13.743] (II) modeset(0): EDID (in hex):[    13.743] (II) modeset(0): 00ffffffffffff0061a901c001000000[    13.743] (II) modeset(0): 291f0103803c21782a1f65a455509f26[    13.743] (II) modeset(0): 0c5054bdcf00714f8180818c81009500[    13.743] (II) modeset(0): 950fa9c0b300023a801871382d40582c[    13.743] (II) modeset(0): 450055502100001e000000fd00324b0f[    13.743] (II) modeset(0): 6413000a202020202020000000ff0033[    13.743] (II) modeset(0): 303837385a30303234373034000000fc[    13.743] (II) modeset(0): 005265646d69203237204e460a200183[    13.743] (II) modeset(0): 02031ef149010312130414051f106703[    13.743] (II) modeset(0): 0c00100000262309070783010000011d[    13.743] (II) modeset(0): 007251d01e206e285500a05a0000001e[    13.743] (II) modeset(0): 662156aa51001e30468f33000e532100[    13.743] (II) modeset(0): 001e8348801871382d4030285500a05a[    13.743] (II) modeset(0): 0000001e0e1f008051001e3030203700[    13.743] (II) modeset(0): 70cf1000001e00000000000000000000[    13.743] (II) modeset(0): 00000000000000000000000000000086[    13.744] (--) modeset(0): HDMI max TMDS frequency 190000KHz[    13.744] (II) modeset(0): Printing probed modes for output HDMI-2[    13.744] (II) modeset(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)[    13.744] (II) modeset(0): Modeline "1920x1080"x75.0  185.63  1920 1968 2008 2200  1080 1085 1090 1125 +hsync +vsync (84.4 kHz e)[    13.744] (II) modeset(0): Modeline "1920x1080"x50.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)[    13.744] (II) modeset(0): Modeline "1920x1080"x59.9  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)[    13.744] (II) modeset(0): Modeline "1920x1080i"x60.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)[    13.744] (II) modeset(0): Modeline "1920x1080i"x50.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)[    13.744] (II) modeset(0): Modeline "1920x1080i"x59.9   74.18  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)[    13.744] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)[    13.744] (II) modeset(0): Modeline "1600x900"x60.0  108.00  1600 1624 1704 1800  900 901 904 1000 +hsync +vsync (60.0 kHz e)[    13.744] (II) modeset(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)[    13.744] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)[    13.744] (II) modeset(0): Modeline "1440x900"x75.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)[    13.744] (II) modeset(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)[    13.744] (II) modeset(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)[    13.744] (II) modeset(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)[    13.744] (II) modeset(0): Modeline "1280x768"x59.9   79.50  1280 1328 1360 1664  768 771 778 798 +hsync +vsync (47.8 kHz e)[    13.744] (II) modeset(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)[    13.744] (II) modeset(0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)[    13.744] (II) modeset(0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)[    13.744] (II) modeset(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)[    13.744] (II) modeset(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)[    13.744] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)[    13.744] (II) modeset(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)[    13.744] (II) modeset(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)[    13.744] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)[    13.744] (II) modeset(0): Modeline "720x576"x50.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)[    13.744] (II) modeset(0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)[    13.744] (II) modeset(0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)[    13.744] (II) modeset(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)[    13.744] (II) modeset(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)[    13.744] (II) modeset(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)[    13.744] (II) modeset(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)[    13.745] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)[    13.745] (II) modeset(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)[    13.745] (II) modeset(0): EDID for output DSI-1[    13.745] (II) modeset(0): Printing probed modes for output DSI-1[    13.745] (II) modeset(0): Modeline "800x480"x59.9   25.98  800 802 804 850  480 487 489 510 -hsync -vsync (30.6 kHz eP)[    13.745] (II) modeset(0): Output HDMI-1 disconnected[    13.745] (II) modeset(0): Output HDMI-2 connected[    13.745] (II) modeset(0): Output DSI-1 connected[    13.745] (II) modeset(0): Using spanning desktop for initial modes[    13.745] (II) modeset(0): Output HDMI-2 using initial mode 1920x1080 +0+0[    13.745] (II) modeset(0): Output DSI-1 using initial mode 800x480 +1920+0[    13.745] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)[    13.745] (==) modeset(0): DPI set to (96, 96)[    13.745] (II) Loading sub module "fb"[    13.745] (II) LoadModule: "fb"[    13.745] (II) Loading /usr/lib/xorg/modules/libfb.so[    13.749] (II) Module fb: vendor="X.Org Foundation"[    13.749] compiled for 1.20.11, module version = 1.0.0[    13.750] ABI class: X.Org ANSI C Emulation, version 0.4[    13.750] (II) UnloadModule: "fbdev"[    13.750] (II) Unloading fbdev[    13.750] (II) UnloadSubModule: "fbdevhw"[    13.750] (II) Unloading fbdevhw[    13.904] (==) modeset(0): Backing store enabled[    13.904] (==) modeset(0): Silken mouse enabled[    14.100] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.[    14.100] (==) modeset(0): DPMS enabled[    14.100] (II) modeset(0): [DRI2] Setup complete[    14.100] (II) modeset(0): [DRI2]   DRI driver: vc4[    14.100] (II) modeset(0): [DRI2]   VDPAU driver: vc4[    14.100] (II) Initializing extension Generic Event Extension[    14.101] (II) Initializing extension SHAPE[    14.101] (II) Initializing extension MIT-SHM[    14.101] (II) Initializing extension XInputExtension[    14.104] (II) Initializing extension XTEST[    14.104] (II) Initializing extension BIG-REQUESTS[    14.104] (II) Initializing extension SYNC[    14.105] (II) Initializing extension XKEYBOARD[    14.105] (II) Initializing extension XC-MISC[    14.105] (II) Initializing extension SECURITY[    14.106] (II) Initializing extension XFIXES[    14.106] (II) Initializing extension RENDER[    14.106] (II) Initializing extension RANDR[    14.107] (II) Initializing extension COMPOSITE[    14.107] (II) Initializing extension DAMAGE[    14.108] (II) Initializing extension MIT-SCREEN-SAVER[    14.108] (II) Initializing extension DOUBLE-BUFFER[    14.108] (II) Initializing extension RECORD[    14.109] (II) Initializing extension DPMS[    14.109] (II) Initializing extension Present[    14.109] (II) Initializing extension DRI3[    14.110] (II) Initializing extension X-Resource[    14.110] (II) Initializing extension XVideo[    14.110] (II) Initializing extension XVideo-MotionCompensation[    14.110] (II) Initializing extension SELinux[    14.110] (II) SELinux: Disabled on system[    14.110] (II) Initializing extension GLX[    14.472] (II) AIGLX: Loaded and initialized vc4[    14.472] (II) GLX: Initialized DRI2 GL provider for screen 0[    14.472] (II) Initializing extension XFree86-VidModeExtension[    14.472] (II) Initializing extension XFree86-DGA[    14.472] (II) Initializing extension XFree86-DRI[    14.475] (II) Initializing extension DRI2[    14.482] (II) modeset(0): Damage tracking initialized[    14.483] (II) modeset(0): Setting screen physical size to 719 x 285[    14.620] (II) config/udev: Adding input device generic ft5x06 (00) (/dev/input/event2)[    14.620] (**) generic ft5x06 (00): Applying InputClass "libinput touchscreen catchall"[    14.620] (II) LoadModule: "libinput"[    14.621] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so[    14.636] (II) Module libinput: vendor="X.Org Foundation"[    14.636] compiled for 1.20.8, module version = 0.30.0[    14.636] Module class: X.Org XInput Driver[    14.637] ABI class: X.Org XInput driver, version 24.1[    14.637] (II) Using input driver 'libinput' for 'generic ft5x06 (00)'[    14.637] (**) generic ft5x06 (00): always reports core events[    14.637] (**) Option "Device" "/dev/input/event2"[    14.638] (**) Option "_source" "server/udev"[    14.662] (II) event2  - generic ft5x06 (00): is tagged by udev as: Touchscreen[    14.664] (II) event2  - generic ft5x06 (00): device is a touch device[    14.665] (II) event2  - generic ft5x06 (00): device removed[    14.700] (**) Option "config_info" "udev:/sys/devices/platform/soc/fe205000.i2c/i2c-22/i2c-10/10-0038/input/input2/event2"[    14.700] (II) XINPUT: Adding extended input device "generic ft5x06 (00)" (type: TOUCHSCREEN, id 6)[    14.700] (**) Option "AccelerationScheme" "none"[    14.700] (**) generic ft5x06 (00): (accel) selected scheme none/0[    14.700] (**) generic ft5x06 (00): (accel) acceleration factor: 2.000[    14.700] (**) generic ft5x06 (00): (accel) acceleration threshold: 4[    14.706] (II) event2  - generic ft5x06 (00): is tagged by udev as: Touchscreen[    14.708] (II) event2  - generic ft5x06 (00): device is a touch device[    14.710] (II) config/udev: Adding input device generic ft5x06 (00) (/dev/input/mouse0)[    14.710] (II) No input driver specified, ignoring this device.[    14.710] (II) This device may have been added with another device file.[    14.712] (II) config/udev: Adding input device vc4-hdmi-0 (/dev/input/event0)[    14.712] (**) vc4-hdmi-0: Applying InputClass "libinput keyboard catchall"[    14.712] (II) Using input driver 'libinput' for 'vc4-hdmi-0'[    14.712] (**) vc4-hdmi-0: always reports core events[    14.712] (**) Option "Device" "/dev/input/event0"[    14.712] (**) Option "_source" "server/udev"[    14.716] (II) event0  - vc4-hdmi-0: is tagged by udev as: Keyboard Pointingstick[    14.716] (II) event0  - vc4-hdmi-0: device is a pointer[    14.716] (II) event0  - vc4-hdmi-0: device is a keyboard[    14.717] (II) event0  - vc4-hdmi-0: device removed[    14.744] (II) libinput: vc4-hdmi-0: needs a virtual subdevice[    14.744] (**) Option "config_info" "udev:/sys/devices/platform/soc/fef00700.hdmi/rc/rc0/input0/event0"[    14.744] (II) XINPUT: Adding extended input device "vc4-hdmi-0" (type: MOUSE, id 7)[    14.744] (**) Option "AccelerationScheme" "none"[    14.744] (**) vc4-hdmi-0: (accel) selected scheme none/0[    14.744] (**) vc4-hdmi-0: (accel) acceleration factor: 2.000[    14.744] (**) vc4-hdmi-0: (accel) acceleration threshold: 4[    14.747] (II) event0  - vc4-hdmi-0: is tagged by udev as: Keyboard Pointingstick[    14.748] (II) event0  - vc4-hdmi-0: device is a pointer[    14.748] (II) event0  - vc4-hdmi-0: device is a keyboard[    14.750] (II) config/udev: Adding input device vc4-hdmi-1 (/dev/input/event1)[    14.750] (**) vc4-hdmi-1: Applying InputClass "libinput keyboard catchall"[    14.750] (II) Using input driver 'libinput' for 'vc4-hdmi-1'[    14.750] (**) vc4-hdmi-1: always reports core events[    14.750] (**) Option "Device" "/dev/input/event1"[    14.750] (**) Option "_source" "server/udev"[    14.754] (II) event1  - vc4-hdmi-1: is tagged by udev as: Keyboard Pointingstick[    14.754] (II) event1  - vc4-hdmi-1: device is a pointer[    14.754] (II) event1  - vc4-hdmi-1: device is a keyboard[    14.755] (II) event1  - vc4-hdmi-1: device removed[    14.776] (II) libinput: vc4-hdmi-1: needs a virtual subdevice[    14.776] (**) Option "config_info" "udev:/sys/devices/platform/soc/fef05700.hdmi/rc/rc1/input1/event1"[    14.776] (II) XINPUT: Adding extended input device "vc4-hdmi-1" (type: MOUSE, id 8)[    14.776] (**) Option "AccelerationScheme" "none"[    14.776] (**) vc4-hdmi-1: (accel) selected scheme none/0[    14.776] (**) vc4-hdmi-1: (accel) acceleration factor: 2.000[    14.776] (**) vc4-hdmi-1: (accel) acceleration threshold: 4[    14.779] (II) event1  - vc4-hdmi-1: is tagged by udev as: Keyboard Pointingstick[    14.780] (II) event1  - vc4-hdmi-1: device is a pointer[    14.780] (II) event1  - vc4-hdmi-1: device is a keyboard[    14.817] (**) vc4-hdmi-0: Applying InputClass "libinput keyboard catchall"[    14.817] (II) Using input driver 'libinput' for 'vc4-hdmi-0'[    14.817] (**) vc4-hdmi-0: always reports core events[    14.817] (**) Option "Device" "/dev/input/event0"[    14.817] (**) Option "_source" "_driver/libinput"[    14.817] (II) libinput: vc4-hdmi-0: is a virtual subdevice[    14.818] (**) Option "config_info" "udev:/sys/devices/platform/soc/fef00700.hdmi/rc/rc0/input0/event0"[    14.818] (II) XINPUT: Adding extended input device "vc4-hdmi-0" (type: KEYBOARD, id 9)[    14.818] (**) Option "xkb_model" "pc105"[    14.818] (**) Option "xkb_layout" "gb"[    14.860] (**) vc4-hdmi-1: Applying InputClass "libinput keyboard catchall"[    14.860] (II) Using input driver 'libinput' for 'vc4-hdmi-1'[    14.860] (**) vc4-hdmi-1: always reports core events[    14.860] (**) Option "Device" "/dev/input/event1"[    14.860] (**) Option "_source" "_driver/libinput"[    14.860] (II) libinput: vc4-hdmi-1: is a virtual subdevice[    14.860] (**) Option "config_info" "udev:/sys/devices/platform/soc/fef05700.hdmi/rc/rc1/input1/event1"[    14.860] (II) XINPUT: Adding extended input device "vc4-hdmi-1" (type: KEYBOARD, id 10)[    14.860] (**) Option "xkb_model" "pc105"[    14.860] (**) Option "xkb_layout" "gb"[    21.722] (--) modeset(0): HDMI max TMDS frequency 190000KHz[    21.991] (II) modeset(0): Disabling kernel dirty updates, not required.[    23.113] (--) modeset(0): HDMI max TMDS frequency 190000KHz[    23.258] (--) modeset(0): HDMI max TMDS frequency 190000KHz[    23.422] (--) modeset(0): HDMI max TMDS frequency 190000KHz[    23.507] (--) modeset(0): HDMI max TMDS frequency 190000KHz[    23.562] (--) modeset(0): HDMI max TMDS frequency 190000KHz[    23.711] (--) modeset(0): HDMI max TMDS frequency 190000KHz