Yes, all looks good, and it's producing 1080p60.
That configuration appears to have booted into the GUI (64x64 image is the cursor). As you have SSH access, you should be able to change the mode by using something likeTBH it sounds like a dodgy cable or connector if you're sometimes getting it working when you move between the 2 HDMIs whilst powered (that is fully supported now, so don't worry about doing so).
That configuration appears to have booted into the GUI (64x64 image is the cursor). As you have SSH access, you should be able to change the mode by using something like
Code:
WAYLAND_DISPLAY="wayland-0" wlr-randr --output HDMI-A-1 --mode 1280x720@60Statistics: Posted by 6by9 — Mon Jul 08, 2024 4:18 pm