Hello everyone,
I have a Compute Module 4 Lite (CM4 Lite) hooked up to an external eMMC. I was able to flash the Raspberry Pi image onto the eMMC using
rpiboot
to connect it as a USB slave. However, after flashing, the CM4 does not boot from the eMMC.
Here's the behavior I'm observing:
The activity LED is solid green initially.
followed by , brief LED blinking.
there after, there is no LED activity at all.
When I reconnect the eMMC as a USB Boot device, I find that the
firstrun.sh
script is still present on the eMMC.
I'm looking for suggestions on how I can proceed from here to get the CM4 Lite to boot properly from the eMMC.
Thank you in advance for your help!
I have a Compute Module 4 Lite (CM4 Lite) hooked up to an external eMMC. I was able to flash the Raspberry Pi image onto the eMMC using
rpiboot
to connect it as a USB slave. However, after flashing, the CM4 does not boot from the eMMC.
Here's the behavior I'm observing:
The activity LED is solid green initially.
followed by , brief LED blinking.
there after, there is no LED activity at all.
When I reconnect the eMMC as a USB Boot device, I find that the
firstrun.sh
script is still present on the eMMC.
I'm looking for suggestions on how I can proceed from here to get the CM4 Lite to boot properly from the eMMC.
Thank you in advance for your help!
Statistics: Posted by Nagarjuna — Tue May 28, 2024 8:12 am