Thankyou,
These are my logs
When I built the kernel with the dtoverlay command (no overlay in /boot/firmware/config.txt) the card did mount without errors and I could write a text file to it (with root permissions).
I then tried adding the sd0 overlay into /boot/firmware/overlays without the overclocking
and it works. So maybe the overclocking is the problem in bookworm?
Anyway that works for me![:)]( "Smile")
These are my logs
Code:
pi@cm4d:~ $ nano sd0-overlay.dtspi@cm4d:~ $ sudo dmesg -Cpi@cm4d:~ $ sudo dtc -@ -I dts -O dtb -o /boot/overlays/sd0.dtbo sd0-overlay.dtspi@cm4d:~ $ sudo dtoverlay sd0pi@cm4d:~ $ dmesg[ 175.811350] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/mmc@7e202000/pinctrl-names[ 175.811388] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/mmc@7e202000/pinctrl-0[ 175.811402] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/mmc@7e202000/bus-width[ 175.811416] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/mmc@7e202000/brcm,overclock-50[ 175.811430] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/mmc@7e202000/brcm,pio-limit[ 175.811443] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/mmc@7e202000/status[ 175.813190] sdhost: log_buf @ 00000000dba537b0 (cd033000)[ 175.867049] mmc2: sdhost-bcm2835 loaded - DMA enabled (>1)pi@cm4d:~ $ dmesg[ 175.811350] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/mmc@7e202000/pinctrl-names[ 175.811388] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/mmc@7e202000/pinctrl-0[ 175.811402] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/mmc@7e202000/bus-width[ 175.811416] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/mmc@7e202000/brcm,overclock-50[ 175.811430] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/mmc@7e202000/brcm,pio-limit[ 175.811443] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/mmc@7e202000/status[ 175.813190] sdhost: log_buf @ 00000000dba537b0 (cd033000)[ 175.867049] mmc2: sdhost-bcm2835 loaded - DMA enabled (>1)[ 224.447384] mmc2: host does not support reading read-only switch, assuming write-enable[ 224.453737] mmc2: Host Software Queue enabled[ 224.453760] mmc2: new high speed SDHC card at address aaaa[ 224.454757] mmcblk2: mmc2:aaaa SC16G 14.8 GiB[ 224.466348] mmcblk2: mmc2:aaaa SC16G 14.8 GiB (quirks 0x00004000)pi@cm4d:~ $ sudo mkdir /mnt/sdcardpi@cm4d:~ $ sudo mount /dev/mmcblk2 /mnt/sdcardpi@cm4d:~ $ dmesg[ 175.811350] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/mmc@7e202000/pinctrl-names[ 175.811388] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/mmc@7e202000/pinctrl-0[ 175.811402] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/mmc@7e202000/bus-width[ 175.811416] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/mmc@7e202000/brcm,overclock-50[ 175.811430] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/mmc@7e202000/brcm,pio-limit[ 175.811443] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/mmc@7e202000/status[ 175.813190] sdhost: log_buf @ 00000000dba537b0 (cd033000)[ 175.867049] mmc2: sdhost-bcm2835 loaded - DMA enabled (>1)[ 224.447384] mmc2: host does not support reading read-only switch, assuming write-enable[ 224.453737] mmc2: Host Software Queue enabled[ 224.453760] mmc2: new high speed SDHC card at address aaaa[ 224.454757] mmcblk2: mmc2:aaaa SC16G 14.8 GiB[ 224.466348] mmcblk2: mmc2:aaaa SC16G 14.8 GiB (quirks 0x00004000)[ 290.177845] mmc2: read transfer error - HSTS 20[ 290.178578] mmc2: read transfer error - HSTS 20I then tried adding the sd0 overlay into /boot/firmware/overlays without the overclocking
dtoverlay=sd0
and it works. So maybe the overclocking is the problem in bookworm?
Anyway that works for me
Statistics: Posted by tennisparty — Thu May 16, 2024 5:23 am