Hi there!
It seems like you're encountering an issue with your Raspberry Pi 4 Model B and your 128GB MicroSD card (SanDisk HIGH ENDURANCE 128GB). The error message you're seeing indicates potential issues with reading the SD card during initialization.
Here are a few troubleshooting steps you can try to resolve this issue:
Check Compatibility: Ensure that your Raspberry Pi 4 Model B is compatible with a 128GB MicroSD card. Some older models may have limitations on the maximum supported capacity.
Verify Power Supply: Make sure your Raspberry Pi is receiving adequate power. Insufficient power can sometimes lead to errors during the boot process.
Update Firmware: Ensure that your Raspberry Pi's firmware is up to date. Sometimes firmware updates can address compatibility issues with certain hardware.
Check Card Formatting: Verify that the MicroSD card is formatted correctly and that the Raspberry Pi Imager properly flashed the Raspberry Pi OS (64-bit) image onto the card. You may want to try reformatting the card and flashing the image again to rule out any potential corruption during the flashing process.
Test with Different Card Readers: Try using a different MicroSD card reader to rule out any issues with the reader itself.
Contact Support: If the issue persists after trying the above steps, consider reaching out to the manufacturer's support for further assistance. They may have additional troubleshooting steps or insights specific to your setup.
I hope one of these solutions helps resolve the issue you're experiencing. Good luck, and feel free to reach out if you have any further questions!
It seems like you're encountering an issue with your Raspberry Pi 4 Model B and your 128GB MicroSD card (SanDisk HIGH ENDURANCE 128GB). The error message you're seeing indicates potential issues with reading the SD card during initialization.
Here are a few troubleshooting steps you can try to resolve this issue:
Check Compatibility: Ensure that your Raspberry Pi 4 Model B is compatible with a 128GB MicroSD card. Some older models may have limitations on the maximum supported capacity.
Verify Power Supply: Make sure your Raspberry Pi is receiving adequate power. Insufficient power can sometimes lead to errors during the boot process.
Update Firmware: Ensure that your Raspberry Pi's firmware is up to date. Sometimes firmware updates can address compatibility issues with certain hardware.
Check Card Formatting: Verify that the MicroSD card is formatted correctly and that the Raspberry Pi Imager properly flashed the Raspberry Pi OS (64-bit) image onto the card. You may want to try reformatting the card and flashing the image again to rule out any potential corruption during the flashing process.
Test with Different Card Readers: Try using a different MicroSD card reader to rule out any issues with the reader itself.
Contact Support: If the issue persists after trying the above steps, consider reaching out to the manufacturer's support for further assistance. They may have additional troubleshooting steps or insights specific to your setup.
I hope one of these solutions helps resolve the issue you're experiencing. Good luck, and feel free to reach out if you have any further questions!
Statistics: Posted by Foster Bronson — Thu May 16, 2024 5:14 am
